ONKYO 7.2 Channel Network AV Receiver. HDMI 7 in, 2 out. Dolby Atmos & DTS:X reproduction. HDMI 4K@60Hz support. Theatre dimensional virtual surround function. Colour Black

  • $1,370.82
    Unit price per 
Shipping calculated at checkout.

Only 0 left!

Download Brochure

Future-ready home entertainment with THX® Certified Select

A harmonious mix of tech and tradition, the TX-NR696 adapts to entertainment life and finds the emotion in every sound source, from 3D film-scores to vinyl records. Next-Generation Network Audio gathers Chromecast built-in*1, Works with Sonos, AirPlay 2, and DTS Play-Fi® with streaming services for smooth multi-room audio evolved by support for the new high-speed 802.11ac (2x2 MIMO) Wi-Fi® specification*2. Dolby Atmos® and DTS:X® pull audiences deep into movies and games, THX Certified Select assuring a cinema-reference experience. If a 5.2.2-ch setup isn’t possible, Dolby Atmos Height Virtualizer*3 and DTS Virtual:X™*3 can create a 3D sound-field from horizontal speaker layouts. Zone 2 outputs bring amped multi-source audio to two rooms, while a flexible new zone line-out/front L/R pre-out terminal lets you listen to how you want, where you want. With revitalized DAA system, 4K/60p/HDR HDMI® terminals, and many extras, this product excels in every aspect.



  • 175W/Ch THX® Certified Select DAA system
  • Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn*3
  • Supports 5.2.2-ch Dolby Atmos® and DTS:X® playback
  • Dolby Atmos Height Virtualizer*4 and DTS Virtual: X™*4
  • HDMI Sub/Zone 2 output shares media to a second display or projector
  • Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi® specification*5
  • Zone 2/Zone B line-out/Front L/R pre-out with DAC shares D/A audio (including HDMI/SPDIF*6) or connects power amp
  • Zone 2 outputs distribute D/A audio sources (including HDMI/SPDIF*6)
  • Stereo Assign Mode to switch Front playback to Height channels
  • DSP-based Vocal Enhancer improves dialogue audibility
  • GUI with OSD via HDMI features media input/output data display function
  • HDMI supports 4K/60p, 4K HDR, 4:4:4/24-bit, BT.2020, HDCP 2.2
  • AccuEQ Advance with AccuReflex
  • One-touch volume memory-presets for A/V inputs



Power output (All channels)


(6Ω, 1kHz, 10% THD, 1-ch driven)


(6Ω, 1kHz, 1% THD, 1-ch driven, IEC)

Dynamic power 

240W (3Ω, Front)

210W (4Ω, Front)

120W (8Ω, Front)

THD+N (Total Harmonic Distortion + Noise)

0.08% (20Hz–20kHz, half power)

Input sensitivity and impedance

200mV rms/47kΩ (Line)

3.5mV rms/47kΩ (Phono MM)

Rated RCA output level and impedance

1V rms/470Ω (Subwoofer pre-out)

200mV rms/2.3kΩ (Zone B/Zone 2 line-out)

Frequency response

 10Hz–100kHz/+1 dB, -3 dB (Direct Mode)

Tone control

 ±10dB, 20Hz (Bass)

±10dB, 20kHz (Treble)

Signal-to-noise ratio

106dB (Line, IHF-A)

80dB (Phono, IHF-A)

Speaker impedance


Tuner Section

Tuning frequency range


FM   87.5MHz–108MHz

       87.5MHz–107.9MHz (Taiwan Model)

AM   522kHz–1,611kHz


        530kHz–1,710kHz (Taiwan Model)


Power supply

AC 220–240V~, 50/60Hz

Power consumption


635W (Taiwan Model)

No-sound power consumption


Standby power consumption


Dimensions (W x H x D)

435 x 173.5 x 379.5mm





*1 The unit may automatically download and apply an Over-the-Air software update during setup. *2 FlareConnect is a proprietary network protocol that shares select audio sources between supported components. Please visit the Onkyo website for product compatibility information. *3 Service availability varies with region and subscriptions may be required. *4 Enabled with a future firmware update. *5 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. *6 When set to Zone 2, HDMI audio is available on inputs 1–3, SPDIF and HDMI support PCM signals only, and simultaneous playback of multiple audio sources is enabled. When set to Zone B, encoded and PCM audio playback for all inputs is enabled in Main and Zone B.